A20  
  Aciers à haute limite d'élasticité    

L’acier à haute limite d’élasticité peut permettre d’envisager des réductions de poids significatives. Plus la semi-remorque est légère, plus le poids transportable est élevé.

 

Propriétés
   

Les aciers à haute limite d'élasticité (HLE) se caractérisent par une ductilité élevée, une propreté interne maîtrisée, une structure à grains fins et une faible teneur en carbone.

 

Avantages
   

Les aciers à haute limite d'élasticité combinent :

  • d'excellentes caractéristiques mécaniques :
    • résistance,
    • résilience,
    • tenue à la fatigue ;
  • une bonne formabilité ;
  • une bonne soudabilité.

 

Grâce à leur haute résistance, ces aciers sont particulièrement adaptés lorsqu'une réduction de poids est recherchée.
Ils sont fréquemment utilisés pour remplacer les aciers de construction.

 

Applications
   

Les aciers à haute limite d'élasticité sont mis en œuvre dans des secteurs aussi divers que le transport (engins de chantiers, remorques, machines agricoles, matériel ferroviaire, etc.), le profilage (rayonnage industriel, etc.) et la construction (grues, glissières de sécurité, candélabres, etc.).
Les aciers à haute limite d'élasticité permettent d'envisager des réductions de poids significatives, notamment dans le cas des grues ou des remorques de véhicules lourds (augmentation de la charge utile).

 

Equivalence des marques et normes
   
  EN 10149-2:1995 SEW 092:1990 UNE 36090 NF A 36-231:1992 BS 1449/1 ASTM A1011-01a Anciens noms de marques
S240MC AM FCE              
S280MC AM FCE   QstE300TM AE275HC   HR40 F30   Soldur 280/Profilar 300/BSK 30
S315MC EN 10149-2 S315MC            
S315MC AM FCE S315MC QstE340TM   E315D   HSLAS-F Grade 45 class 2 Soldur 320/Profilar 340/BSK 34/SPXE 340
S355MC EN 10149-2 S355MC            
S355MC AM FCE S355MC QstE380TM AE340HC E355D HR43 F35 HSLAS-F Grade 50 class 2 Soldur 360/Profilar 380/BSK 38/SPXE 380
S390MC AM FCE   QstE420TM AE390HC   HR46 F40   Profilar 420/BSK 42/SPXE 420
S420MC EN 10149-2 S420MC            
S420MC AM FCE S420MC QstE460TM AE440HC E420D HR50 F45 HSLAS-F Grade 60 class 2 Soldur 420/Profilar 460/BSK 46
S460MC EN 10149-2 S460MC            
S460MC AM FCE S460MC QstE500TM AE490HC     HSLAS-F Grade 65 class 2 Soldur 460/Profilar 500/BSK 50/SPXE 480
S500MC EN 10149-2 S500MC            
S500MC AM FCE S500MC QstE550TM   E490D   HSLAS-F Grade 70 class 2 Soldur 500/Profilar 550/BSK 55/SPXE 530
S550MC EN 10149-2 S550MC            
S550MC AM FCE S550MC QstE600TM   E560D HR60 F55 HSLAS-F Grade 80 class 2 Soldur 550
Qualité en italique : non incluse dans la norme


 

Dimensions
    Noir
Epaisseur (mm) Largeur mini S240MC AM FCE S280MC AM FCE S315MC AM FCE S355MC AM FCE S390MC AM FCE S420MC AM FCE S460MC AM FCE S500MC AM FCE S550MC AM FCE
Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi
1,50 ≤ ép. < 1,70 800 1560 1540 1300 1180 1180 - - - -
1,70 ≤ ép. < 1,80 1620 1590 1430 1250 1250
1,80 ≤ ép. < 1,90 1630 1300 1270 1020 1020
1,90 ≤ ép. < 2,00 1650 1780 1540 1400 1400 1120 1050 1120 940
2,00 ≤ ép. < 2,20 1700 1830 1600 1450 1450 1260 1260 1250 1180
2,20 ≤ ép. < 2,40 1470 1320 1310 1320
2,40 ≤ ép. < 2,60 1790 1930 1680 1550 1550 1380 1360 1380 1310
2,60 ≤ ép. < 2,80 1980 1750 1700 1700 1450 1410 1450 1400
2,80 ≤ ép. < 3,00 2030 1820 1520 1500 1520 1450
3,00 ≤ ép. < 3,20 1930 1790 1590 1580 1570 1520
3,20 ≤ ép. < 4,50 2020 1660 1660 1660 1620 1580
4,50 ≤ ép. < 12,00 2130 2150 2150 2150 2150 2150 2150 2150
12,00 ≤ ép. < 15,00 1570 1720 2130 1570
15,00 ≤ ép. < 16,00 1570 2140 1550 1370

Décapé
Epaisseur (mm) Largeur mini S240MC AM FCE S280MC AM FCE S315MC AM FCE S355MC AM FCE S390MC AM FCE S420MC AM FCE S460MC AM FCE S500MC AM FCE S550MC AM FCE
Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi Largeur maxi
1,50 ≤ ép. < 1,60 800 1530 1540 1420 1250 1060 - - - -
1,60 ≤ ép. < 1,70 1570 1450 1090
1,70 ≤ ép. < 1,80 1610 1590 1470 1290 1130
1,80 ≤ ép. < 1,90 1630 1630 1500 1380 1200 1030 1030 1030 1030
1,90 ≤ ép. < 2,00 1650 1780 1620 1440 1280 1120 1070 1120 1090
2,00 ≤ ép. < 2,20 1670 1830 1460 1450 1350 1280 1280 1240
2,20 ≤ ép. < 2,40 1640 1540 1480 1340 1340 1290
2,40 ≤ ép. < 2,60 1930 1670 1610 1570 1400 1400 1400 1350
2,60 ≤ ép. < 2,80 1980 1730 1670 1640 1450 1460 1460 1450
2,80 ≤ ép. < 3,00 2000 1530 1520 1530 1530
3,00 ≤ ép. < 3,20 1880 1730 1650 1630 1580 1580
3,20 ≤ ép. < 4,00 1660 1670 1660 1620 1590
4,00 ≤ ép. < 5,00 2040 2040 2040 2040 2000 2000 2000
5,00 ≤ ép. < 6,30 2070 2070 2130 2130 2130 2070 2070
6,30 ≤ ép. < 10,00 1610 2070 2070 2070



 

Caractéristiques mécaniques
   
 
Direction
Epaisseur (mm)
Re (MPa)
Rm (MPa)
A80 (%)
A 5,65√So (%)
Rayon de pliage(D)
KV -20°C (J)
S240MC AM FCE L < 3 240 - 320 360 - 450 ≥ 27 - - -
3 - 16 - 350 - 440 - ≥ 32
T < 16 - - - - 0 -
S280MC AM FCE L < 3 280 - 350 370 - 450 ≥ 26 - - -
3 - 16 - - - ≥ 30
T < 3 300 - 380 370 - 450 ≥ 25 - 0 -
3 - 16 - - - ≥ 29
S315MC EN 10149-2 L 1,5 - 3 ≥ 315 390 - 510 ≥ 20 - - -
3 - 20 - ≥ 24
T 1,5 - 20 - - - - 0 -
S315MC AM FCE L < 3 315 - 395 415 - 495 ≥ 24 - - -
3 - 6 - ≥ 28
6 - 16 - - ≥ 40
T < 3 340 - 420 420 - 500 ≥ 23 - 0 -
3 - 16 - - - ≥ 27
S355MC EN 10149-2 L 1,5 - 3 ≥ 355 430 - 550 ≥ 19 - - -
3 - 20 - ≥ 23
T 1,5 - 20 - - - - ≥ 0,5 -
S355MC AM FCE L < 3 355 - 435 430 - 520 ≥ 22 - - -
3 - 6 - ≥ 25
6 - 16 ≥ 40
T < 3 380 - 460 440 - 530 ≥ 21 - 0 -
3 - 16 - ≥ 24
S390MC AM FCE L < 3 390 - 480 460 - 560 ≥ 20 - - -
3 - 6 - ≥ 24
6 - 16 - ≥ 40
T < 3 420 - 500 470 - 570 ≥ 19 - - -
3 - 6 - ≥ 23
6 - 16 - ≥ 0,2
S420MC EN 10149-2 L 1,5 - 3 ≥ 420 480 - 620 ≥ 16 - - -
3 - 20 - ≥ 19
T 1,5 - 20 - - - - ≥ 0,5 -
S420MC AM FCE L < 3 420 - 520 490 - 600 ≥ 18 - - -
3 - 6 - ≥ 22
6 - 16 - ≥ 40
T < 3 450 - 550 500 - 600 ≥ 17 - ≥ 0,2 -
3 - 16 -
S460MC EN 10149-2 L 1,5 - 3 ≥ 460 520 - 670 ≥ 14 - - -
3 - 20 - ≥ 17
T 1,5 - 20 - - - - ≥ 1 -
S460MC AM FCE L < 3 460 - 560 520 - 640 ≥ 15 - - -
3 - 6 - ≥ 18
6 - 16 - ≥ 40
T < 3 490 - 590 530 - 640 ≥ 14 - ≥ 0,6 -
3 - 6 - ≥ 17
6 - 16 - ≥ 1
S500MC EN 10149-2 L 1,5 - 3 ≥ 500 550 - 700 ≥ 12 - - -
3 - 16 - ≥ 14
16 - 20 -
T 1,5 - 16 - - - - ≥ 1 -
S500MC AM FCE L < 2 500 - 600 560 - 700 ≥ 15 - - -
2 - 3 ≥ 16
3 - 6 - ≥ 19
6 - 16 - ≥ 40
T < 2 530 - 630 570 - 700 ≥ 14 - ≥ 0,6 -
2 - 3 ≥ 15
3 - 6 - ≥ 18
6 - 16 - -
S550MC EN 10149-2 L 1,5 - 3 ≥ 550 600 - 760 ≥ 12 - - -
3 - 16 - ≥ 14
16 - 20 -
T 1,5 - 16 - - - - ≥ 1,5 -
S550MC AM FCE L < 3 550 - 650 620 - 750 ≥ 12 - - -
3 - 6 - ≥ 14
6 - 16 ≥ 40
T < 3 580 - 680 630 - 750 ≥ 11 - ≥ 0,8 -
3 - 6 - ≥ 13
6 - 16 ≥ 1,5
Qualité en italique : non incluse dans la norme
Valeur en gras : plus stricte que la norme


 

Analyses chimiques
   
 
C (%)
Mn (%)
P (%)
S (%)
Si (%)
Al (%)
Nb (%)
V (%)
Ti (%)
Ceq (%)
Galvanisation
S240MC AM FCE < 0,100 < 0,80 < 0,025 < 0,020 < 0,03 > 0,015 < 0,025 < 0,200 < 0,150 < 0,18 Class 1
S280MC AM FCE < 0,080 < 0,80 < 0,025 < 0,015 < 0,03 > 0,015 < 0,025 < 0,200 < 0,150 < 0,23 Class 1
S315MC EN 10149-2 < 0,120 < 1,30 < 0,025 < 0,020 < 0,50 > 0,015 < 0,090 < 0,200 < 0,150 - No
S315MC AM FCE < 0,100 < 0,70 < 0,025 < 0,015 < 0,03 > 0,015 < 0,045 < 0,200 < 0,150 < 0,25 Class 1
S355MC EN 10149-2 < 0,120 < 1,50 < 0,025 < 0,020 < 0,50 > 0,015 < 0,090 < 0,200 < 0,015 - No
S355MC AM FCE < 0,100 < 1,40 < 0,025 < 0,015 < 0,03 > 0,015 < 0,060 < 0,200 < 0,150 < 0,32 Class 1
S390MC AM FCE < 0,100 < 1,50 < 0,025 < 0,012 < 0,03 > 0,015 < 0,065 < 0,200 < 0,150 < 0,36 Class 1
S420MC EN 10149-2 < 0,120 < 1,60 < 0,025 < 0,015 < 0,50 > 0,015 < 0,090 < 0,200 < 0,150 - No
S420MC AM FCE < 0,110 < 1,50 < 0,025 < 0,012 < 0,03 > 0,015 < 0,065 < 0,200 < 0,050 < 0,38 Class 1
S460MC EN 10149-2 < 0,120 < 1,60 < 0,025 < 0,015 < 0,50 > 0,015 < 0,090 < 0,200 < 0,150 - No
S460MC AM FCE < 0,120 < 1,50 < 0,025 < 0,012 < 0,03 > 0,015 < 0,080 < 0,200 < 0,060 < 0,40 Class 1
S500MC EN 10149-2 < 0,120 < 1,70 < 0,025 < 0,015 < 0,50 > 0,015 < 0,090 < 0,020 < 0,150 - No
S500MC AM FCE < 0,120 < 1,70 < 0,025 < 0,012 < 0,03 > 0,015 < 0,090 < 0,200 < 0,100 < 0,42 Class 1
S550MC EN 10149-2 < 0,120 < 1,80 < 0,025 < 0,015 < 0,05 > 0,015 < 0,090 < 0,020 < 0,150 - No
S550MC AM FCE < 0,100 < 1,70 < 0,025 < 0,012 < 0,03 > 0,015 < 0,090 < 0,200 < 0,100 < 0,44 Class 1
Qualité en italique : non incluse dans la norme
Valeur en gras : plus stricte que la norme

Les analyses chimiques indiquées sont les analyses de coulée.

V+Nb+Ti ≤ 0,22%.